Gerstel

Valid in Indonesia only

Gerstel

_SORTBY

First << Previous 1 2... 7 8 9 10 11... 15 16 Next >> Last

018489-100-00

Y-piece to connect the mVAP with the vacuum tube

018490-000-00

Vent tubing for vacuum pump in conjunction with mVAP; length 2.0 m

018492-100-00

TDU-Pyro plug in board for C 506

018571-000-00

Plug-in board for GERSTEL PFC in conjunction with Controller 506

018578-000-00

10 gram weight for cubis balance holder

018579-000-00

20 gram weight for cubis balance holder

018583-000-00

Make Up Gas connection for µFlowManager

018603-000-00

ePneumatics basic unit

018639-000-00

Sample vessel, without cover, stainless steel, sulfinert coating, volume with cover 250 mL, maximum filling height 17 mm, ID 99 mm

018639-600-00

Sample vessel, without cover, stainless steel, sulfinert coating, volume with cover 625 mL,

018640-000-00

Sample vessel, without cover, stainless steel, sulfinert coating, volume with cover 500 mL, maximum filling height 50 mm, ID 99 mm

018641-000-00

Sample vessel, without cover, stainless steel, sulfinert coating, volume with cover 1 L, maximum filling height 117 mm, ID 99 mm

018662-010-00

Glass liners CIS 4 deactivated, filled with quartz wool certified liner for Pyrolysis-Module Package of 10

018670-003-00

Needle for mVAP - length 15 mm, for 2mL vials package of 3

018680-000-00

Isolation kit complete for DHS Slider

018688-000-00

ePneumatics plugin board (C506)

018691-000-00

ePneumatics split PV module on block

018762-000-00

Proportional valve for MCS 2

018764-000-NS

Operation manual for GERSTEL Thermal Extractor Manual - C 200 version

018777-000-00

Connection cable from Controller 200 to ODP 2/ODP 3

018803-019-00

Stator for ACE 2

018803-020-00

Preventive Maintenance Kit for ACE version 2

018803-023-00

Valco valve for C5-2006

018803-025-00

PTFE tube 1/16 “x1.0mm ID Length: 5m

018803-026-00

Multilink PCB for ACE or HPD 0725.620

018803-034-00

Internal T rotor seal

018803-043-00

SSM valve (short wiring)

018803-044-00

RF Antenna

018803-045-00

Syringe drive assembly HPD 2

018803-049-00

Tubing syringe-valve HPD for GERSTEL SpeXOS

018804-016-00

GERSTEL SPExos Polymer SAX, 25-35µm cartridges; 96 units for HPLC up to 300 bar

018804-023-00

GERSTEL SPExos Polymer WAX, 25-35µm cartridges 96 units for UHPLC up to 1000 bar

018805-901-00

1/16" ETFE Ferrules 1 package (10 units)

018805-902-00

Valco rotor seal for C5-2006

018805-903-00

1/16" Delrin Nut

018805-905-00

Valco stator for C2-2006

018805-907-00

Card for DBSA clamp calibration, 5 pc.

018805-910-00

Grease gun (loaded with HP grease)

018805-914-00

Flangeless Ferrule 1/16 Polypropylene 1 packet (1 units)

018805-915-00

Flangeless Male Nut 1/16 Blue 1 packet (1 units)

018805-916-00

HP Grease 5ml

018806-800-00

Replacement hose PFA AD=1/16", ID=1/32", length 6m

018809-931-00

ACE Left Clamp Assembly

018809-934-00

clamps spindle assy

018862-001-00

Gas mouse connection; knurled compl. PEGS

018862-500-00

Gas mouse connection to 6mm; knurled PEGS

018883-000-00

Ball-bearing for DHS slider

018887-000-00

Septum nut for DHS Large sample container

018964-010-00

GRAPHPACK®-3D ferrule for CIS 4/6 glass liners - conditioned, Package of 10

019085-501-00

Replacement Sample Cell - for the connection of pipes with an outer diameter = 1/16 " without SLH and o-ring

019085-502-00

Replacement Sample Cell, version SilcoNert - for the connection of pipes with an outer diameter = 1/16 " without SLH and o-ring

019100-000-00

Rear energy chain guide for DHS L

019114-010-00

Glass liners CIS 4 - deactivated, filled with 12mg quartz wool 1 package (10 units)

019152-000-00

Plug-in board for DHS Large Automat in conjunction with Controller C 506

019164-010-00

O-Ring 8.5x1 for GERSTEL-UPC PLUS-coolant line package of 10

019184-010-00

Twister holder for 10mL/20 mL vials with srew caps to mount up to 3 Twister onto the glass wall package of 10

019255-000-00

Adapter cable Power Supply AHM250PS48 with C200

019293-007-00

GRAPHPACK®-2M adapter for S/SL-Injector or FID GC Shimadzu 2010 Plus for column outside diameter 0.70 mm

019298-200-00

Coolant connection at flow line, blue marked -adapter check valve (SS) with ceramic ball and filter -hose connector and hose clip for UPC plus serial no < 07822-02500

019403-000-NS

Manual for MPS Robotic pro

019425-000-00

LC Standby Timer basic unit

019440-000-00

Remote-Start-Cable for GC Bruker Scion 436/456 icw. C 506 and APG

019461-000-00

O-Ring 11x1 for GERSTEL-UPC PLUS-coolant line package of 10

019513-200-00

Coolant connection at return line, red marked -adapter check valve (SS) with ceramic ball -hose connector and hose clip for UPC plus serial no < 07822-02500

019516-200-00

Coolant connection at flow line, blue marked -adapter check valve (SS) with ceramic ball and filter for UPC plus serial no > 07822-02500

019534-200-00

Upgrade for adapter and check valves; Set for outline and inline of the UPC PLUS

019550-010-00

Adapter with luer connector for the transportation of syringe filter package of 100

019550-100-00

Adapter with luer connector for the transportation of syringe filter package of 1000

019550-200-00

Adapter with luer connector for the transportation of syringe filter package of 1000

019592-000-00

Twister®-empty tube holder for Gerstel MPS Robotic icw. MPS Standard Wash Station

019592-035-00

TD 3.5+ empty tube holder for GERSTEL-MPS Robotic icw. MPS Standard Wash Station

019595-000-00

ALEX-empty tube holder for GERSTEL-MPS Robotic icw. MPS Standard Wash Station

019603-000-00

Empty tube park station for TDU pyrolysis module icw. MPS Wash Station

019681-000-00

Start-Remote-Cablel MPS 2 (Interface 1) for Waters-LC

019702-000-00

OQ/PV Thermocouple adapter for GERSTEL TDU Pyrolyse

019719-000-00

Connecting hose from the reservoir to the pneumatic

019724-000-00

Stainless steel rope for mVap station

019756-002-00

Heat exchanger for CCD 2 (Serial number greater than 07785-01000)

019767-000-00

Cooling finger holding and pulling device for CCD

019769-500-00

Screw cap for CCD 2

019769-600-00

Screw cap with compensating valve for UPC Plus for serial no.>07822-05000

019786-010-00

O-Ring 8,00x3,5 Viton for GERSTEL PES, package of 10

019793-900-00

O-ring kit for expansion tank CCD 2

019806-000-00

Limit stop, complete for Gerstel DHS slider locking mechanism

019867-005-00

Glass liners - for GERSTEL CIS 4/TDU/TD3.5+ - filled with silanized glass wool 9mg - Topaz coated package of 5

019868-002-00

Front panel for CCD 2 with display

019902-010-00

Stainless steel blind plug 1/16“(VICI Part-No. ZP1)

019902-016-00

Stainless steel tubing OD 360µm ID 150µm l=45cm

019915-000-00

Interfacescable I22697 f. ( EMT2SD4MWE) or (C25G-24528EMT)

019920-002-00

Capillary PEEK 1/16" x ID 0,25mm, blue

019920-004-00

Capillary PEEK 1/16" x ID 0,75mm, green

019920-007-00

PEEK Bulkhead Unions High pressure <350 bar (5000 psi) 0.25 mm bore

019920-013-00

PEEK capillary 1/16" x ID 0,17mm, yellow

019920-015-00

One-piece PEEK fingertight fittings, black, 10-32, package of 5

019958-000-00

End cap set with washer for TDS storage container

019985-000-00

Filter for UPC Plus -reservoir (for serial number higher than 07822-02000)

019985-100-00

Filter for UPC Plus -reservoir with screw cap (for serial number higher than 07822-5000)

019992-000-00

Upgradekit Rollers Vers.2 for DHS-carriage

020002-000-00

Teflon cone for calibration adapter; TDU Pyrolyzer

020003-500-00

UPC Plus upgrade kit for mainboard (version 5) with PT 100 sensor for heat sink (for UPC Plus serial no. > 007822-03300)

First << Previous 1 2... 7 8 9 10 11... 15 16 Next >> Last

/home/bercasby/public_html/template/luxqueen/html.php