Gerstel

Valid in Indonesia only

Gerstel

_SORTBY

First << Previous 1 2... 8 9 10 11 12... 15 16 Next >> Last

020006-050-00

Filter insert 17 µm for 10/20 mL-vials with screw caps 1 package (50 units)

020011-002-00

Starter kit filter inserts for 10/20 mL screw cap vials -2 filter inserts in 10 mL screw cap vials for extraction and withdrawal of particle free aliquots with micro liter syringes Suitable for automation with GERSTEL-MPS Filtration pore size: 17 µm Fil

020019-003-00

Septum adapter for Tedlar bag with connection AD 3mm

020019-006-00

Septum adapter for Tedlar bags with connection AD 6mm

020020-000-00

Luer adapter for septum adapter for Tedlar bag with connection AD 6 mm (part no. 020019-006-00)

020022-000-00

Safety clamp for Luer adapter

020030-000-00

Waste vial

020032-000-00

Syringe with hose for check valves

020134-002-00

Magnetic tray adapter

020207-000-00

TDS - VDA 278 Temperatur Validation Kit It is used to measure the temperature at a defined place inside the TDS 3. The kit was designed to check the TDS 3 temperature especially if the TDS 3 icw. C506 is used for emission analyses for material testing. An

020211-000-00

O-Ring for 1 liter DHS-L vessel pre-conditioned

020211-010-00

O-Ring for 1 liter DHS-L vessel pre-conditioned 1 package (10 units)

020212-000-00

3mL empty-cartrige inclusive transport adapter and needle 1 package (500 units) to cut the cartridges on the needed lenghts is required

020278-001-00

CIS adapter to connect a 1/16" tube

020296-900-00

Replacement positioning ring for Tray set for 3 x 180 mL Vials package of 3

020308-050-00

Septa for transportation adapter GERSTEL-ALEX / ATEX/TD3.5+ icw. TDU-HIT/SPME package of 50

020311-000-00

Cryo tubing for CCD 2

020318-600-00

CCD 2 board with microcontroller for serial no. larger than 07785-01000

020318-700-00

LED board with cable (CCD 2) (Serial number greater than 07785-01000)

020328-014-00

Socket connector with internal wiring for service plug CCD 2

020328-016-00

Service connector with pump start for CCD 2

020328-502-00

Controller input connector with cable for CCD 2 (Serial no. greater than 07785-01000)

020328-504-00

Level sensor (for 5V) with cable (CCD 2) (Serial number less than 07785-01000)

020328-506-00

Power switch with cable (CCD 2) (Serial number greater than 07785-01000)

020328-507-00

Solenoid valve connection cable for CCD 2 (Serial no. greater 07785-01000)

020328-508-00

Fan pair with plug for CCD 2 (Serial no. greater than 07785-01000)

020328-509-00

Connection cable pump CCD 2 (Serial number greater than 07785-01000)

020328-510-00

24 VDC Power connector with cable for CCD 2 (serial number greater than 07785-01000)

020328-511-00

Temperature display with cable (CCD 2) (Serial number greater than 07785-01000)

020328-515-00

Pipe heater for CCD 2

020362-000-00

Main board for GERSTEL QuickMix

020410-000-00

Mounting piece wrench size 6 for the installation TDU 2 / CIS 4 (1 piece ) 2x 020410-000-00 and 1x 013064-501-00 knurled mounting piece are required for installation

020411-000-00

Adapter plate spare part for CIS / TDU 2/TD 3.5+

020413-000-00

Insulation; Heating block connection; TDU 2 / TD3.5 +

020414-500-00

Insulation for TDU 2

020426-000-00

Mounting allignment kit for TDU 2; spare part

020426-035-00

Mounting allignment kit for TD 3.5+; spare part

020441-000-00

Coolant line for TDU 2/ TD 3.5+ (1 piece)

020448-101-00

Injector heater for TDU 2, complete with internal board and PT for serial no. greater 07812-01000

020448-136-00

Injector heater with board for TD 3.5+ for serial no. greater than 07813-00300

020462-100-00

TDU 2 heater unit

020462-135-00

TD3.5+ heater unit

020470-000-00

Spacer for spoiler DHS station

020578-504-00

Injection unit for TDU 2 icw. CIS 4

020578-535-00

Injection unit for TD 3.5+ icw. CIS 4

020580-100-00

Quick Mix basic unit version MPS Robotics

020586-010-00

TD 3.5+ Desorption Tube - filled with 200mg of Tenax-TA - 6.35mm O.D., 89mm long stainless steel, - bar code, inert coated - preconditioned with brass caps package of 10

020601-010-00

TD 3.5+ Desorption Tube - unfilled - 6.35mm O.D., 89mm long, stainless steel,bar code package of 10

020602-010-00

TD 3.5+ Desorption Tube - filled with 260mg of Tenax-TA - 6.35mm O.D.,89mm long, stainless steel, - bar code, inert coated - preconditioned with brass caps package of 10

020605-010-00

TD 3.5+ Desorption Tube - filled with Carbopack-B (2.3 cm) and Carbopack-X (2.3 cm) - 6.35mm O.D.,89mm long, stainless steel, - bar code, inert coated - preconditioned with brass caps package of 10

020656-000-00

Fixing nut for TDU2/TD3.5 Injector

020659-000-00

Plug-in board for GERSTEL TDU/TD 3.5 in conjunction with Controller 506

020660-000-00

Adapter set for MPS robotic OQ/PV

020699-759-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ on a GC PE Clarus 500 oder 600 in conjunction with a GERSTEL Cooled Injection System CIS 4C/6C - inclusive mounting kit for two GERSTEL UniversalPeltierCooling

020699-768-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ on a GC Trace in conjunction with a GERSTEL Cooled Injection System CIS 4C/6C - inclusive mounting kit for two GERSTEL UniversalPeltierCooling UPC. *** Required

020699-770-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ on a GC Varian 3800/450 in conjunction with a CIS 4C or CIS 6C - inclusive mounting kit for two UniversalPeltierCooling UPC PLUS. Country of origin: Germany

020699-774-00

Mounting kit for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ in conjunction with BRUKER GC SCION 436 and GERSTEL Cooled Injection System CIS 4C/6C - inclusive mounting kit for two GERSTEL UniversalPeltierCooling UPC PLUS

020699-780-00

Mounting kit for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ in conjunction with GC Trace 1310 and GERSTEL Cooled Injection System CIS 4C/6C - inclusive mounting kit for two GERSTEL UniversalPeltierCooling UPC PLUS

020699-781-00

Mounting kit for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ in conjunction with GC Shimadzu 2010 and GERSTEL Cooled Injection System CIS 4C/6C - inclusive mounting kit for two GERSTEL UniversalPeltierCooling UPC PLUS

020699-783-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ on a GC 7890 (injection port A) in conjunction with a GERSTEL-Cooled Injection System CIS 4 and a S/SL with Autosampler 7683(injection port B) - inclusive mountin

020699-790-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ in conjunction with a GERSTEL-PeltierCooling UPC PLUS on a GC 6890/7890/8890

020699-793-00

Mounting hardware for GERSTEL-ThermalDesorptionUnit TDU 2 or GERSTEL ThermalDesorber TD 3.5+ in conjunction with two GERSTEL-PeltierCooling UPC PLUS on a GC 7820

020801-005-00

Desorption tubes for GERSTEL-TD 3.5+ with fritted glass, package of 5

020810-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Tenax TA; preconditioned; package of 5; (6x60mm)

020814-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Carbopack B and Carboxen-1000; preconditioned; package of 5; (6x60mm)

020815-001-00

Helix capillary for connection of 1/16 "- carrier gas line for SLH , TDU or TD 3.5+

020818-001-00

SLH-plug connector for the carrier gas line (d = 0.8 mm)

020819-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Carbopack B+X and Carboxen 1000; preconditioned; package of 5; (6x60mm)

020820-001-00

SLH-plug connector for the carrier gas line with helix capillary for connection of 1/16 "- carrier gas line

020821-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Carbopack C+B and Carbosieve SIII; preconditioned; package of 5; (6x60mm)

020823-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Tenax GR; preconditioned; package of 5; (6x60mm)

020825-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Carbopack B+X; preconditioned; package of 5; (6x60mm)

020826-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Tenax-TA and Carbosieve SIII; preconditioned; package of 5; (6x60mm)

020828-005-00

Desorption tube GERSTEL-TDU with barcode - filled with Carbopack-B and Carboxen-1003 preconditioned; package of 5; (6x60mm)

020830-005-00

Desorption tube kit GERSTEL-TDU (6x60mm) consisting of: 1 unit filled with Carbopack B+X, Carboxen 1000 1 unit filled with Carbopack C+B, Carbosieve SIII 1 unit filled with Tenax GR 1 unit filled with Carbopack B+X 1 unit filled with Tenax TA prcondition

020839-000-00

TDU/TD 3.5-plug connector for the carrier gas line (d = 0.8 mm)

020840-000-00

Plug connector kit for the carrier gas line in conjunction with GERSTEL SLH and TDU 2/TD 3.5+

020847-000-00

Agitator for 4x40 mL for GERSTEL-MPS Robotic Tmax=100°C without magnetic transport adapter for 40mL-vials

020960-010-00

Transport adapter for Liquid injection TD3.5+ package of 10

020960-100-00

Transport adapter for Liquid injection TD3.5+ package of 100

020961-000-00

Kit for the reduction of both CCD 2 cryo tubes

020966-010-00

O-Ring 6.5x1 Viton PTFE coated - conditioned for GERSTEL-TD3.5+ transportation adapter package of 10

020966-100-00

O-Ring 6.5x1 Viton PTFE coated - conditioned for GERSTEL-TD3.5+ transportation adapter package of 100

020968-000-00

Desorption tube for GERSTEL-TDU - filled with Shincarbon X, Carbotrap B and Carbopack-X barcode /pre-conditioned/Storage Container package of 1

020996-000-00

Remote-Start-Cable Agilent ERI for APG

021005-010-00

Transport adapter TD 3.5+, package of 10

021005-100-00

Transport adapter TD 3.5+, package of 100

021046-000-00

Clamping lever for TDU 2 /TD 3.5

021051-000-00

Insert for mounting tool TDU / Twister® to demount the glass inserts of the Twister® rack

021052-010-00

O-ring kit for TD 3.5+ transport adapter, package of 10

021052-100-00

O-ring kit for TD 3.5+ transport adapter, package of 100

021053-035-00

Starter kit for TD 3.5+ Automation Option

021063-005-00

Seal for carrier gas connector for SLH 1 packet (5 units)

021075-010-00

GERSTEL-FLEX-Twister® for Stir Bar Sorptive Extraction (SBSE) with Polydimethylsiloxan-Sorbens (PDMS), film thickness 1.0 mm, 10 mm lenght 1 packet (10 units) (GERSTEL-Twister®s are only sold to customers with a GERSTEL-Thermo Desorption System TDS 2 Plea

021075-100-00

GERSTEL-FLEX-Twister® for Stir Bar Sorptive Extraction (SBSE) with Polydimethylsiloxan-Sorbens (PDMS), film thickness 1.0 mm, 10 mm lenght 1 packet (100 units) (GERSTEL-Twister®s are only sold to customers with a GERSTEL-Thermo Desorption System TDS 2 Ple

021112-090-00

Extension kit for ultrasonic equipment basic (021130-000-NS) for GERSTEL MPS 2 / MPS Liquid / MPS robotic or MPS robotic pro for Agilent GC 6890/7890/8890 consisting of: Platform for height adjustment of the ultrasonic unit to the GC adaptation for operat

021112-097-00

Extension kit for ultrasonic equipment basic (021130-000-NS) for GERSTEL MPS 2 / MPS Liquid / MPS robotic or MPS robotic pro for benchtop operation or mounting hardware for centrifuge Sigma 4K16R consisting of: Platform for height adjustment of the ultras

021112-098-00

Extension kit for ultrasonic equipment basic (021130-000-NS) for GERSTEL MPS Liquid / MPS robotic or MPS robotic pro for benchtop operation (H=820mm) consisting of: Platform for height adjustment of the ultrasonic unit for benchtop operation, the followin

021130-998-00

IR adapter for Sonorex Digitec DT 102H RC

021165-000-00

Adapter cable for system tester for connection with TDU 2 with system cable

First << Previous 1 2... 8 9 10 11 12... 15 16 Next >> Last

/home/bercasby/public_html/template/luxqueen/html.php